Energy From Scrap With Biomass Wood Pellets | ECOSTAN Biofuel Pvt Ltd

Protecting the environment is everyone’s responsibility in this polluted world. There are a lot of factors that affect the environment such as fuel smoke. We can’t finish it, but we can find other ways to reduce it. 

Biomass Wood Pellets

Making use of biomass wood pellets is an initiative to reduce environmental pollution. Energy can be produced from scrap with biomass wood pellets. And numerous plants in India manufacture high-quality biomass wood pellets, such as Ecostan Biofuel Pvt Ltd. Let’s gain more information about biomass wood pellets.

How They Are Manufactured?

Wood pellets can be produced from any biomass, including paper, cardboard, and straw, and are frequently created from leftover sawdust and wood chip material from the lumber sector.

Sizing

These waste pieces of wood and biomass are chipped and shredded to reduce their size, and they are then put through a hammer mill to grind them into the small powder needed to produce biomass fuel pellets. The wood is then transported through a conveyor equipped with magnets to remove any potential metal and screens to catch any potentially midsize fragments.

Mixing And Drying

The moisture content might be anything between very dry and very wet, depending on the type of raw material and where it was produced.

The procedure needs some moisture in the pellet-making material, but too little or too much will prevent the pellets from forming and holding together in a usable size.

Biomass Fuel Pellets

The material can be passed through a vibrating fluid bed dryer several times until the desired moisture content is obtained. It is crucial to evenly combine the ground and dried material to achieve great quality in the final pellets. To assist it form and maintaining the pellet shape, a conditioner or additive may need to be applied at this phase depending on the parent material.

Pelletizing

The pulp is put through a pellet mill after the processed material has been dried, mixed, and conditioned as necessary. A metal dies with colander-like holes forms the basis of the mill, which is subsequently covered by a roller. The roller in the pellet mill will compress the woody pulp as it is introduced, forcing it through the holes in the die. 

The lignin in the wood fusses and binds the pellet together as a result of the roller's pressure, which generates heat and compression. The newly created pellets threads are cut into smaller lengths by a knife on the die's exterior, and these are subsequently collected.

Screening And Cooling

The pellets may occasionally not form properly or may break throughout the process, making them too small for the consumer to use effectively. To ensure that only the properly shaped and sized pieces reach the end of the processing line, the pellets are pushed through a vibrating screener after leaving the pellet mill. The pellets can also cool naturally thanks to this process, as cooling them too quickly can result in stress fractures.

The bottom line

If you want to buy biomass pellets at affordable costs, reach out to Ecostan Biofuels. Apart from this, if you have any queries regarding this blog, let us know in the comment section. We will surely answer your questions.